
Turn four-mallet jazz vibraphone comping, smoky film-noir bell chords, and shimmering neo-soul or post-rock vibraphone beds into editable polyphonic MIDI. Upload MP3, WAV, M4A, or FLAC, keep vibraphone preselected, check the pedal-sustained chord voicings and mallet dampening on the piano roll, and pull the unquantized .mid into your DAW.
Play the vibraphone recording beside the piano roll. Aluminum bars ringing over motor-driven resonator discs create a warm, pulsating shimmer — verify close-voiced jazz extensions and exact damper-pedal cutoffs before exporting.
In jazz quartets, lounge tracks, and lo-fi beats, vibraphone shares the warm midrange with upright piano and hollow-body guitar. Preselecting vibraphone applies a hard mask that zeroes in on the cord-mallet aluminum fundamental.
Vibraphonists shape harmony not just with the foot damper pedal, but by pressing a mallet against a ringing bar ('mallet dampening') to silence one voice while others ring on. The piano roll preserves independent note lengths across four-mallet chords.
When the vibraphone's motor is switched on, rotating butterfly discs at the top of the resonator tubes create deep amplitude and subtle pitch modulation. The model tracks right through the fan pulse without chopping held bars into repeated notes.
Vibraphone uses yarn- or cord-wrapped mallets on wide aluminum bars with a sustain pedal. Use the glockenspiel page for high, hard-mallet steel pings without a pedal, or the marimba page for warm wooden bars without metallic ring.
Four steps from a jazz quartet take, vibraphone solo, or neo-soul stem to a revoiceable .mid.
Drop in an MP3, WAV, M4A, or FLAC — Gary Burton/Milt Jackson-style jazz solos, Roy Ayers neo-soul grooves, ambient post-rock beds, or solo mallet stems. Or choose from My Music.
Vibraphone is locked in when you launch from this page. Leave it soloed so the engine isolates the aluminum mallet bars instead of ride cymbals or piano comps.
Scrub the piano roll beside the source audio to confirm that close-interval cluster voicings (seconds and fourths) and mallet-damped passing tones have accurate note-off endings.
Download the unquantized .mid into Logic, Ableton, or Cubase. Load a virtual vibraphone and set your motor RPM and cord hardness to match the vibe.
Once the four-mallet voicings and sustain tails align on the roll, download the .mid for your DAW. Need printable vibraphone notation with pedaling marks? Visit the Audio to Sheet Music vibraphone page.
History surfaces the unquantized transcription MIDI first — retaining laid-back jazz swing, rolled four-mallet spreads, and independent voice damping.
Drop the .mid directly onto Pianoteq Vibraphone V-B/V-M, Soniccouture, or VSL Vibes and automate motor speed, damper pedal, and mallet bounce.

Overlapping pedal washes and fast motor tremolo can blur chord changes — keep your jazz voicings sharp with these tips.
If a player ran the resonator fan motor at an aggressive 8–10 Hz soul-jazz speed, a long decay tail can pulse strongly. Scrub long held chords on the roll to ensure the fan pulse stayed as one continuous bar.
Fender Rhodes and vibraphone have nearly identical sine-like fundamental spectra in the C3–C6 register. If both comp simultaneously in a neo-soul mix, split stems first before converting.
The transcription writes the actual ringing duration of each bar into the note length itself. If your vibraphone VST prefers short note-ons held by a CC64 sustain pedal lane, you can add a pedal release at each chord change in your DAW.
“Transcribing four-mallet Burton-style solo vibraphone voicings by ear is tough because inner voices get damped with a free mallet while outer voices keep ringing under the pedal. The piano roll showed the exact independent note lengths.”
“We sampled an old 70s soul-jazz vibraphone stem and wanted to replay the progression on Pianoteq with a slower motor speed. The unquantized .mid kept the lazy behind-the-beat chord rolls completely intact.”
“Even with the resonator fans spinning on our film-noir cue, the pitch tracker didn't chop the sustained minor-ninth chords into pieces. Saved me an hour of manual cleanup.”

Upload the audio, keep vibraphone selected, review the four-mallet voicings on the roll, and download the .mid.